Hardware
NAS
PXL_20210913_143151023.jpg
Components
Notes
- At first I bought the Intel Core i3-10100F CPU (F => no integrated GPU), because it did only cost half of what the version with GPU costs and to minimize the power usage of the CPU (why should I need a GPU on a NAS anyway). I wasn't aware that I couldn't even get into the mainboards BIOS/UEFI without GPU, so that did not work.
- The mainboard only has 4x SATA III interfaces but the case supports 6x 3.5" drives, this is why I needed the PCI-E extension card (I found no cheap mini ITX mainboard with 6x SATA interfaces)
- I opted for the (more expensive) gold certified PSU so that I can utilize as much of the drawn power as possible to save energy and cost
- I currently use only one memory module because it is a left over from my old PC. I plan to upgrade this to two memory modules in the future, so I can utilize dual channel RAM for a bit of performance gain and be more safer in case one module dies.
Backup
Components
| Component |
Model |
| Hard Drive Enclosure |
Xystec 4-Bay Hard Drive Enclosure, USB 3.0 or eSATA |
| Drives |
- Seagate Barracuda 5TB 3.5" (ST500DM003)
- Toshiba 6TB 3.5" (MD04ACA600)
- Seagate Barracuda 8TB 3.5" (ST800DM004)
- WD 10TB 3.5" (WD1EMAZ)
|
Notes
- I used the USB hard drive enclosure in combination with a Raspberry Pie as my old NAS. Now that I have build my new NAS I did no longer have a usage for it.
- All backup drives are from shucked external drives which I used as backup drives in my old setup. I decided it was more practical to combine the external drives into one enclosure instead of having them separate.
