Skip to main content

Hardware

NAS

Images

PXL_20210913_143151023.jpg  PXL_20210913_143409708.jpg

PXL_20210913_143346510.jpg  PXL_20210913_143427138.jpg

Components
Component Model
CPU Intel Core i3-10100 3.6 GHz Quad-Core
CPU Cooler Noctua NH-L9i
Mainboard ASRock H510M-ITX/ac Mini ITX LGA1200
Memory CorsairCrucial VengeanceRAM LPXCT8G4DFRA266 8GB DDR4-3200DDR4 CL162666 MHz CL19
Case Fractal Design Node 304 Mini ITX Tower
Power Supply be quiet! Pure Power 11 CM 400W (80+ Gold Certified Semi-modular ATX)
Extension Card BEYIMEI PCI Express to 2 Port SATA III 6Gbps
Drives
  • Transcend 120GB SSD SATA III 6Gb/s MTS820S
  • WD Red 6TB 3.5" 5400 RPM (WD60EFRX)
  • WD Red 6TB 3.5" 5400 RPM (WD60EFRX)
  • WD Red 8TB 3.5" 5400 RPM (WD80EFAX)
  • WD Red 8TB 3.5" 5400 RPM (WD80EFAX)
  • Seagate IronWolf 8TB 3.5" 7200 RPM (ST8000VN004)
  • Seagate IronWolf 8TB 3.5" 7200 RPM (ST8000VN004)

 

Notes
  • At first I bought the Intel Core i3-10100F CPU (F => no integrated GPU), because it did only cost half of what the version with GPU costs and to minimize the power usage of the CPU (why should I need a GPU on a NAS anyway). I wasn't aware that I couldn't even get into the mainboards BIOS/UEFI without GPU, so that did not work.
  • The mainboard only has 4x SATA III interfaces but the case supports 6x 3.5" drives, this is why I needed the PCI-E extension card (I found no cheap mini ITX mainboard with 6x SATA interfaces)
  • I opted for the (more expensive) gold certified PSU so that I can utilize as much of the drawn power as possible to save energy and cost
  • I currently use only one memory module because it is a left over from my old PC.module. I plan to upgrade this to two memory modules in the future, so I can utilize dual channel RAM for a bit of performance gain and be more safer in case one module dies.

Backup

Components
Component Model
Hard Drive Enclosure Xystec 4-Bay Hard Drive Enclosure, USB 3.0 or eSATA
Drives
  • Seagate Barracuda 5TB 3.5" (ST500DM003)
  • Toshiba 6TB 3.5" (MD04ACA600)
  • Seagate Barracuda 8TB 3.5" (ST800DM004)
  • WD 10TB 3.5" (WD1EMAZ)

Notes

  • I used the USB hard drive enclosure in combination with a Raspberry Pie as my old NAS. Now that I have build my new NAS I did no longer have a usage for it.
  • All backup drives are from shucked external drives which I used as backup drives in my old setup. I decided it was more practical to combine the external drives into one enclosure instead of having them separate.
Back to top